Capture smooth, dynamic sweeping pans shots similar to Hollywood production style with Proaim 14ft fully featured camera crane production package. The Aluminum constructed robust ribbed section jib crane assembles quickly without tools to benefit on-location productions. Known for its high strength and machined intersecting joints with secure assembly. At the end of your shoot, the camera boom breaks down into two 4 parts for easier travel and storage. Stainless steel support cables are included for maximum support of heavy loads with better stability.
For Commercial/Wedding/Documentary/Independent/Professional Video Makers
Sr. Pan tilt head with joy stick control features 360 degree end-less panning and tilting movement. The package also includes some complimentary items like Lanc Controller & Tool pouch. Adding production value through shot selection just got a whole lot easier with PROAIM 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head.
"WHAT YOU SEE, IS WHAT YOU GET"
- High quality camera crane perfect for any demanding angle.
- Fully adjustable metal wire system for superior stability and alignment.
- Smooth effortless motions on three axis with built in roller thrust bearing system.
- Uses home style exercise weights with a one inch mounting hole.
- Fixed camera angle when controlling handle 'pin locked'.
- Quick, Flexible & dynamic champion for all locations.
- 2 axis motorized camera head with high torque motors.
- 360 degree panning and tilting to capture numerous angles.
- Consistent run speed even at slowest setting.
- Stable, Non slip feet Tripod stand.
- Portable and easy to carry.
- 100% Satisfaction Guarantee.
Video is for demonstration only Actual Product may vary due to Product Improvements
14ft CAMERA JIB ARM
HIGH CAPACITY CAMERA BASE PLATFORM High-capacity Camera Base platform is built to exacting standards for a remarkably stable point. It allows direct camera mounting on jib. Superior design set this base platform apart from others.
RIBBED SECTION CAMERA CRANE ARM BODY FOR HIGH STRENGTH Ribbed sections makes the jib arm stronger & durable. It supports cameras up to 15lbs without pan tilt Head and 10lbs when using with pan tilt head. The cable-tensioned design of the Proaim 14ft camera crane allows it to reach farther and higher while maintaining stability.
MACHINED INTERSECTING JOINTS FOR QUICK AND SECURE ASSEMBLY Intersection joint assembly allows for quick and secure connection. A solid stainless steel thumbscrew assures a tight and secure fit from above and below the camera crane arm.
CENTRAL FORK WITH THRUST ROLLER BEARINGS TO HOUSE HEAVY AXIAL LOADS AND SHOCK LOADS The fork provides you a maximum stability, smooth movements & jerk free shots. Thrust needle roller bearings are fitted with a form-stable cage to reliably guide and keep many needle rollers. These bearings enable to house heavy axial loads and shock loads.
LOCKING PINS FOR STABLE OR MOVING SHOTS High strength SS locking pin is used at the pivot point, and is connected properly to prevent from ever being lost.
- The control handle can be unlocked by releasing the locking pin to get moving shots.
- You can achieve fixed camera angles when controlling handle is pin locked.
CABLES AND COUPLINGS Our modular cable system boosts camera crane stability and rigidity. The superior-quality cable tensioning system keeps the 14ft camera crane taut, rock solid and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime.
WEIGHT-CLOSERS (INCLUDED) Stronger Hi-tensile weight closers help to achieve perfect balance.
SENIOR PAN-TILT HEAD
Designed for DV, HDV and broadcast cameras weighing upto 7.5kg / 16.5lbs or less. Our Proaim Senior Pan Tilt head offers 360 degree endless panning and tilting with reversal points.
- Runs on 12v DC power produced by the included A/C adapter or also accepts external 12V DC battery power through the included 3mtr long 4 pin XLR cable for outdoor shooting.
- You receive the Pan-Tilt Head with assembled wiring for Top and Bottom Motor.
- To install Power out to head (4 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.
Tilt the camera independently
- The Joystick control system includes a 7.5 mt long operating cable and AC adapter.
- Operational from a flat surface in handheld mode or when attached to the bottom of the jib arm.
SUPERB PROPORTIONAL CONTROL
- Joystick has proportional linear movement i.e. farther you move the joystick, the faster the head moves.
- Joystick is touch sensitive.
- Small movement – less speed.
- More movement – more speed.
Smart widget with
proportionate linear movement
PROAIM LANC ZOOM CONTROLLER (P-ZC-3DV)
The Proaim Zoom Control
for DV Cameras is a universal controller for LANC and Panasonic MiniDV
or HDV cameras, with a converter switch for LANC (most Sony and Canon
cameras) and Panasonic. A sensitive thumb switch allows for variable-zoom
speed from slow to fast. The zoom lever allows you to zoom out to wide-angle
or zoom in to telephoto. Lightweight and compact, this unit has an outlet
cable and can be clamped on tripod pan handles, monopods, stabilizers,
and other such devices.
Note! Works only
with Sony & Canon cameras with a 2.5mm mini-jack LANC input and Panasonic
models with a 2.5mm mini-jack Cam Remote input.
- Zoom speed varies from slowest to fastest with the touch of
- Mounts on most pan arms with ease.
An exquisite body
with intuitive control
FREE PROAIM PRO LCD-003 7" MONITOR KIT
The Proaim 7" Widescreen Color TFT LCD Monitor displays 4:3 and 16:9 widescreen and works perfectly with dv/hdv/dslr camcorder or any other camcorder which is lacking an external LCD screen. Our Proaim LCD screen has a high resolution, ensures sharp focus, the LCD screen displays 480 x 234 pixels.. It is fully compatible with NTSC & PAL. The LCD features AC-DC Power Adapter, Remote Control, direct connecting AV cables, Rechargeable Battery Pack, Headphone Jack etc..
The lcd monitor attaches to camera's accessory shoe with the help of shoe mounting adapter. The monitor has an on-screen display for easy adjustment of all settings; color, brightness, contrast, volume etc.. You can use this LCD Monitor with your any other package like shoulder mount, stabilization system etc. with the help of any 1/4" screw adapter.
- Male RCA jacks for a direct connection to your camera without adapters.
- 16:9 or 4:3 Adjustable Display widescreen.
- Compatible with most Digital SLR and HD DV Cameras including Sony, Nikon, Canon, Panasonic, JVC..
- Headphone jack
- High output stereo speakers.
- Full functional Remote control
- NTSC & PAL Compatible
- Battery attachment on back of LCD itself
- LCD stand for tabletop mountingl
- Antenna Mounting
- Attaches to camera's accessory shoe
- On-board AV input
PROAIM 12V POWER PACK
PROAIM 12V POWER PACK is
a high power, professional battery pack designed for portable applications.
It is the most powerful block battery available in the market. PROAIM
12V POWER PACK is highly simple, no-nonsense and affordable block battery
that has no travel restrictions.
Complete power supply
solution for long hours shooting
One of the unique features
of PROAIM 12V POWER PACK is that it holds battery check feature wherein
LED charge indicator, indicates the power consumption in three different
- Fully charged,
( indicates green color)
- Lowest voltage level achieved (indicates red color) and
- In case of any technical faults (blinks yellow color)
Ensure Hi-quality power signals
We have the battery Pack in YELLOW and BLACK color. By default we will
send the Power Pack in Yellow color. Kindly leave a note if you need
the Power pack in Black color while placing the order.
Proaim 14ft camera crane
with jib stand pan tilt head & portable 12V power pack comes in a foam
lined, custom fit, protective storage case with easy tote handles.
for perfect storage
Gets you sweeping
crane shot that captures your audience's attention
The Supportive accessories are for demonstration purpose only.
Share your thoughts with other customers - Write Your Review
14FT RIBBED JIB CRANE SPECIFICATIONS
Weighing Capacity maximum
8kg (17.6 lbs)
Variable shooting lengths
12ft , 9ft
CNC made Aluminum Powder Coated
Jib Arm Shape
Jib Arm Break downs into
Length of Jib sections
3. 5ft each
Camera Mount Bolt
¼”-20 and 3/8”-16
Jib Section Jointers
Bearing at Centre Fork
Pan Thrust bearing with washer made of stainless steel
Camera Tilt Angles
Up to 270 degree
Stainless steel locking pin for stable or tilt camera angles
Pan Lock (For Jib)
Tilt Lock (For Jib)
Height Range from ground level
15 ft. when stand height adjusted at 5ft
Length from tripod to Camera Mount
Total jib arm length
Camera Mount plate
Rectangle( 10.5cm X 9cm )
Camera Platform Levelling
By stress cable
Stress Cable made of metal with adjusting turn buckle hook
Weight Holder Rod
Made of MS Nickel chrome,
Length : 355mm
Dia : 25mm
2pc. Made of MS Nickel chrome
Horizontal/Vertical Movement Lock
LCD Mount Provision
Add Counter Weights in the rear section of Jib according to Camera and Pan Tilt Head weight as per this chart :
The jib has a varying weight ratio depending on the length you have chosen.
The 14 jib arm itself balances at about11kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.
The 12ft jib arm itself balances at about 4kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.
The 9ft jib arm itself balances at about 3kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 3 and you will know how much weight to buy.
Buy a few extras in case you add other accessories.
CAMERA JIB STAND
- Made of Aluminum Black anodized
- Base spread - 32"- 48"
- Height adjustment - 44"- 80"
- Completely collapsed height - 46"
- Outer Dia of top part of Stand - 50mm
- Makes the camera jib arm stable & solid as a rock
- Safety Pin for Secure Pole
- Weight capacity of the stand is 200lbs (90kg)
Two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees
2- Big Aluminum Gears (Dia-88mm)
2- Small Brass Gears (Dia-13.5mm)
Minimum height of head
Maximum height of head
AC Adapter input
AC 100 - 240V ; output - DC 12V -2A
3 Meter long
Weight of Pan Tilt
Carrying Bag Dimensions
50 X 35 X 19 cm
2x 4-Pin XLR male connectors
- Proaim 14ft Video DSLR Camera Jib
- Proaim Jib Stand
- Sr. Pan Tilt Head with Joystick Box
- LCD Monitor Arm
- Universal Adapter
- AC Adapter
- Cable with Connector
- Proaim Lanc Zoom Controller (P-ZC-3DV)
- FREE Proaim Pro LCD -003 7'' monitor kit (Added on 14-Oct-2016)
- Proaim Power Pack
- Storage Bag
Battery block gives me acomplete solution to all my worries related to power supply required for long hour shoots or on-fields shoots.WoW!! Thank u.
By Mr. Akash Verma, Hoshiarpur
Amazing Crane with Amazing features. I m very Impressed with the quality of this great jib !! I have used it already!! I Love my jib!!
By Mr. Kunal Kapoor, Gurgaon
Wow !! Extraordinary price and where i also got all things which i was expecting.
By Mr. Suraj Kumar, Gujarat
I can easily perform Tilting movements with the controlling handle. It make me happy again. Thank u Proaim.
By Mr. Sudhir Sharma, Banglore
All in my budget. I can't believe that i got an amazing jib which is perfectly under my budget.
By Mr. Shubhashish Sahu, Orissa